EFRP-S2502 ps2 mini redundant 500w power supply features: mini redundant form factor 500w with atx outputs 80plus? bronze level power efficiency 1+1 redundancy / load sharing 5~50 working temperature general specification input range : 100 to 240 vac, +/10% power factor: > 0.99 minimum efficiency: 85% @ 50% load (power module) hold up time: 20 ms @ 80% load short circuit protection over current protection over voltage protection no load operation mtbf >100,000 hours@25 operating temperature: 5 to 50 operating humidity: 20 to 90 % emi/rfi: ce, fcc class a safety: ul, tuv, ccc 5000 meter , cb, input and output characteristics input dc output voltage frequency current load +3.3v +5v +12v 12v +5vsb 100~240 vac 47~63hz 48a max.load 25a 30a 41a 0.5a 2.5a min.load 1a 1a 0.05a 0a 0a 1. note 1: combined load on 3.3v and 5v rails shall no t exceed 170w. 2. note 2: total output power shall not exceed 500w. ripple and noise output +3.3v +5v +12v 12v 5vsb load regulation 5% 5% 5% 10% 5% line regulation 1% 1% 1% 1% 1% ripple & noise 50mv 50mv 120mv 120mv 50mv
mechanical outline dimension: 150x85x190(mm) outline drawing ?etasis electronic corporation. all rights reserved . etasis electronics corporation reserves the right to make changes to their products, specification, or to discontinue any prod uct and its service at anytime without notice. the information and specification from etasis is believed to be accurate and reliable. how ever, etasis assumes no responsibility for any busi ness loss due to specification changes. etasis products are not designed to be use d in system deemed to be critical, or in any system wherein failure or malfunction could result in injury or death.
|